Framethrower

Description

The Framethrower allows seamless standard and RTG video modes to come from your Pi Storm.

Enable High-quality HDMI output of standard OCS/ECS Denise modes to emit via the Raspberry Pi’s HDMI port. This allows you to use a single monitor for both Pi Storm RTG video modes and classic Amiga standard modes.

You connect the framethrowers 15 pin to the Raspberry Pi’s camera port and therefore requires a Raspberry Pi with a camera port.

• Fully assembled.
• Pre-Flashed and ready to plug in.
• Plugs into the Denise socket.
• Pre-flashed and ready, but you will still need to update Emu68 config files on the SD Card for the Pi (instructions included).

What you will need (not included):

• Pi Storm
• Raspberry Pi with a camera port
• A 15-pin (or 15pin to 22pin) standard Raspberry Pi cable. Please check your Raspberry Pi’s camera port and verify if it needs a 15 pin or 22 pin cable before buying.